Home » FORD FALCON MUSTANG WINDSOR 289 302 351W PULLEY SET 1 GROOVE CRANKSHAFT & ALTERNATOR - 3 BOLT 1964-69 WITH ELECTRIC WATER PUMP

FORD FALCON MUSTANG WINDSOR 289 302 351W PULLEY SET 1 GROOVE CRANKSHAFT & ALTERNATOR - 3 BOLT 1964-69 WITH ELECTRIC WATER PUMP

FORD FALCON MUSTANG WINDSOR 289 302 351W PULLEY SET 1 GROOVE CRANKSHAFT & ALTERNATOR - 3 BOLT 1964-69 WITH ELECTRIC WATER PUMP
FORD FALCON MUSTANG WINDSOR 289 302 351W PULLEY SET 1 GROOVE CRANKSHAFT & ALTERNATOR - 3 BOLT 1964-69 WITH ELECTRIC WATER PUMP
Product Code: WWWP1550SPKEWP
Availability: In Stock
AU$340.34
   - OR -   

CRANKSHAFT AND ALTERNATOR PULLEY'S PLUS HARDWARE.

 

Billet Aluminium Ford Small Block V-Belt Pulley Kit (3 Bolt) for our Electric Water Pump Alternator and Bracket

1 Groove Crankshaft Pulley and 1 Groove Alternator Pulley for 289, 302 or 351W.

Application:

Ford Passenger cars 1964 - 1969
Ford Trucks 1964 - 1976

Fits vehicles with:

1) Factory 3 bolt damper (Aftermarket dampers may require 0.950" spacer)
2) Water Pump with Passenger side lower radiator hose. 
3) Dampener face to water pump flange face 3 7/8"
4) Our Alternator Bracket or OEM bracket with 1.5" spacer 

 

Kit Includes:

1 x WWWP1551S 3 BOLT 1 GROOVE CRANKSHAFT PULLEY

1 x WWWP0137 FORD ALTERNATOR PULLEY 1 GROOVE

Note: This kit is specifically designed for use with our Alternator Bracket or OEM bracket from a power steering vehicle with 1.5" spacer between alternator and cylinder head. If you have an OEM bracket with 2.5" spacer between alternator and cylinder head you should contact us for the correct kit. This is because there are two mounting locations for the Ford Alternator depending on what accessories you are running. Our brackets are designed for the "Power Steering" location which is closer to the engine than the "Alternator Only" location.

Note: This kit will work with our Alternator Bracket for 289-302 WWWAB30355EWP or for 351W – WWWAB30395EWP  There are two mounting locations for the Ford Alternator depending on what accessories you are running. If you have an old OEM bracket from an "Alternator Only" car then you will need to adjust the mounting location or purchase a new alternator bracket.

DON'T RISK PURCHASING SO CALLED "HIGH GRADE CAST AND MACHINED" PULLEYS THAT CAN EXPLODE AND RUIN YOUR EXPENSIVE ENGINE WHEN YOU CAN PURCHASE CERTIFIED 6061-T CNC BILLET PULLEYS FOR PRACTICALLY NO MORE.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Continue