FORD FALCON MUSTANG WINDSOR 289 302 351W PULLEY SET 2 GROOVE CRANK POWER STEERING & ALT - 4 BOLT 69 + WITH ELECTRIC WATER PUMP

CRANKSHAFT, POWER STEERING PUMP, ALTERNATOR PULLEY'S PLUS HARDWARE.

Billet Aluminum Ford Small Block V-Belt Pulley Kit (4 Bolt) for our Electric Water Pump Alternator and Power Steering Bracket

2 Groove Crankshaft Pulley, 1 Groove Power Steering Pump Pulley and 1 Groove Alternator Pulley for 289, 302 or 351W. Designed for use with our Alternator Bracket or OEM Bracket with 1.5" spacer between alternator and cylinder head (as opposed to 2.5" spacer).

Application:

Ford Passenger cars 1969 1/2
Ford Trucks 1977+

Fits vehicles with:

1) Factory 4 bolt damper (Aftermarket dampers may require 0.950" spacer)
2) Water Pump with Passenger’s side lower radiator hose. (Australian Cars)
3) Dampener face to water pump flange face 3 1/4"
4) Our Alternator Bracket or OEM Bracket with 1.5" spacer

Note: This kit is designed to work with our Alternator Bracket or the OEM bracket with 1.5" spacer between the alternator and cylinder head. 

Note: This kit will work with our Alternator Bracket for 289-302 WWWAB30355EWP or for 351W – WWWAB30355EWP  and the Power Steering Bracket - WWWAB30398SAGEWP There are two mounting locations for the Ford Alternator depending on what accessories you are running. If you have an old OEM bracket from an "Alternator Only" car then you will need to adjust the mounting location or purchase a new alternator bracket.

DON'T RISK PURCHASING SO CALLED "HIGH GRADE CAST AND MACHINED" PULLEYS THAT CAN EXPLODE AND RUIN YOUR EXPENSIVE ENGINE WHEN YOU CAN PURCHASE CERTIFIED 6061-T CNC BILLET PULLEYS FOR PRACTICALLY NO MORE.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: