FORD FALCON MUSTANG WINDSOR 289 302 351W 2 GROOVE CRANKSHAFT PULLEY - 4 BOLT TRANSPLANTED 69 + INTO 64-69 ENGINE

CRANKSHAFT PULLEY PLUS HARDWARE.

Billet Aluminum Ford Small Block V-Belt 2 Groove Pulley (4 Bolt) Transplanted into Early Cars which had originally 3 Bolt Crankshafts.

 

2 Groove Crankshaft Pulley for 289,302 and351W Windsor. Designed for use with our Alternator Bracket or OEM Bracket with 1.5" spacer between alternator and cylinder head (as opposed to 2.5" spacer).

        TECHNICAL SPECS  

• Overall Length: 1.9"
• Diameter: 5.4"
• Grooves: 2
• Bolt Pattern: 4 Bolt
• Bolt Circle: 3.25"
• Pilot Diameter: 2.4"

 

Application - Late Model Engines Transplanted into:

Ford Passenger cars 1964-1969
Ford Trucks 1964-1976

Fits vehicles with:

1) Factory 4 bolt damper (Aftermarket dampers may require 0.950" spacer)
2) Water Pump with Driver’s side lower radiator hose. (Australian Cars) 
3) Dampener face to water pump flange face 3.0"

Note: This kit will work with our Alternator Bracket for 289-302 WWWAB30351 or for 351W – WWWAB30391. There are two mounting locations for the Ford Alternator depending on what accessories you are running. If you have an old OEM bracket from an "Alternator Only" car then you will need to adjust the mounting location or purchase a new alternator bracket.

 

DON'T RISK PURCHASING SO CALLED "HIGH GRADE CAST AND MACHINED" PULLEYS THAT CAN EXPLODE AND RUIN YOUR EXPENSIVE ENGINE WHEN YOU CAN PURCHASE CERTIFIED 6061-T CNC BILLET PULLEYS FOR PRACTICALLY NO MORE. 

 

 

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: